Discovering the Modutek Rotary Wafer Etching Equipment

If you are looking for the most efficient, most reliable, and safest rotary wafer etching machine, you will discover the benefits of the rotary wafer etching equipment from Modutek. The company's Model SPS-rotary wafer etching equipment is a machine that is powerful and will rotate steadily for up to 80 revolutions per minute (rpm).

Presently, the Model SPS-rotary wafer etching equipment has been rated as one of most efficient, most dependable and safest rotary wafer etching machines on the market today. In terms of usability and control, this machine definitely cuts above the rest.

The system is an economical, automated, and ergonomically planned machine for batch processing. This rotary wafer etching equipment is specially manufactured the following processes: wafer reclaim, precise chemical etching, resist etching or cleaning substrates, and stripping developing.

Why this wafer etching system is so in-demand? Here are the things you will want to know about the system:

• It has a dual-tank wet station.
• The system supports wafer cleaning or rinsing. It will also handle chemical etching with transfers happening ergonomically between tanks.
• The system allows for easy operating. First, you load the wafer boats appropriately into the assembly carrier and then close the fume door. When this is done, all you have to do is to push the START button.
• The system has pre-programmed features. The carrier assembly brings the wafer boats directly to the tanks for chemical processing. This is followed by the rotational agitation for a specific preset time.
• As all systems processes can be pre-programmed, usually you will want to allow this pre-set time to elapse. After the pre-set time is complete and the system automatically turns off. You may, however, even cancel the process in the middle of it if needed. Once the system comes to a complete stop, the carrier assembly moves to a rinse tank for the rinse cycle. These cycles are also alternatively called Quench-Quick, Dump-Overflow rinsing.
• The last process of the system comes to rinsing. An audible alarm will let you know that the rinsing process has been finished.
• You may notice that the carrier assembly continues spinning until you physically press the RESET button. Once the RESET is pushed, the carrier moves to position to be removed from the driving unit.

Model-SPS Rotary Wafer Etching Equipment:

1. The system has a closed loop motor control. It comes with an encoder that can increase the rotational agitation precision.
2. High throughput.
3. Touch screen control and microprocessor power. It also comes with easy accessibility and has easy operable control functions.
4. Program is as many as five process procedures - or "recipes" - by way of a interface operated by touch screen. The interface displays all the recipes in a coordinated manner. It also displays results as a single interface, furthering convenience of monitoring.
5. During processing, the wafer boat continues to rotate. Then the rapid transfer occurs between the process bath and the quench tanks to ensure the results that are always consistent.
6. Environment friendly.
7. Double containment instruction.
8. Utilize the fail-safe feature when the N2 pressure's power is out.
9. Bath temperature control.
10. All parts are protected against fluids that are corrosive. These parts are either made from inert plastic or have been sealed appropriately.

Specifications:

1. Agitation - axial rotation over 0 – 80 rpm.
2. The process chemistry temperature can be controlled to +/- 1 / 2 degrees over ambient 100 degrees.
3. The process time can be set between 0 – 9999 seconds or 0.0 – 999.9
4. The product capacity can handle either 50 x 6" wafers or 25 x 8" wafers at the same time.
5. The pre-rinse time can be set between 0 – 9999 seconds.
6. The quick dump cycle can be set between 0 – 9999 seconds.

The system also offers these options:

1. gravity chemical refilling
2. fume condensation
3. process tank material options
4. resistivity monitoring in the rinse tank
5. chemical circulation
6. heating/cooling in process tanks
7. large-size wafer options are also available

Contact Modutek

Modutek is one of the leading semiconductor and wafer etching equipment suppliers in the San Jose, California area. The company has over 30 years of experience in providing electrical schematics that are considered industry-standard, solid models, as well as plumbing and instrumentation design and flow simulation. Modutek has been providing such services to high-tech manufacturers, universities, and research facilities. You can contact Modutek through this page http://www.modutek.com/contact-us/. Or you may visit our office at 6387 San Ignacio Avenue, San Jose.

Chemical Handling Equipment Addresses High Tech Manufacturing Needs

The usual issue for companies working with chemicals at various points of the manufacturing process is to find the right chemical handling equipment. They understand that the equipment needs to comply with all regulation requirements and be very dependable. Using chemicals is vital to many manufacturing processes. Any company that needs this type of equipment wants the services of a supplier who not only has extensive experience and expertise, but also offers excellent customer service if any issues are found. They want to know the issues are properly handled while using the equipment.

Modutek Corporation understands your company's needs and will meet your specifications. The right supplier will help you focus on the main concerns of your business like improving and developing manufacturing processes and procedures.

Leave all these things to an experienced company such as Modutek who is well-versed in chemical handling equipment. When you work with Modutek, you will now be able to focus your attention on other areas of your business without needing to worry about the quality, performance, and how reliable your chemical handling equipment is. We are confident we are able to provide you with right equipment to aid you in treating chemicals at any stage of your manufacturing process.

Modutek's Chemical Handling Products

Modutek offers a complete series of equipment for chemical handling to meet a wide range of manufacturing processes:

1. Fume Scrubbers
Modutek's fume scrubbers effectively remove hazardous fumes, gases, and other pollutants from the atmosphere using a minimum amount of water. With Modutek's fume scrubbers, you can achieve your goal of having quality air standards. Their fume scrubbers can also supply an air flow rate from 500 to 25,000 cubic feet per minute (CFM). These fume scrubbers are widely used by manufacturers working with plating and wet processing stations. Modutek also customizes their equipment to the company’s requirements and specifications.

2. Modutek's acid neutralization and acid neutralization systems generates a seamless, smooth process flow when used with other chemical processes. These systems offer continuous flow and batch systems. Modutek's throughput capacity for these systems can be customized and designed to comply with any production facilities' own specific requirements and regulations.

3. Modutek's chemical collections systems, chemical lift stations, and pump carts are a reliable set of equipment used for chemical handling that follows the flow of chemicals. This set of equipment has been designed to work together so that you are able to work with the chemical flow more easily. They are compatible so they function together. This ensures your process will not encounter any gaps. Furthermore, you won't face any issues with less efficient or less compatible equipment.

Advanced Equipment and Process Components

More than just handling specific chemicals, Modutek's chemical handling equipment has other useful functions:

1) Quartz baths - process quartz and reduce the chances of other chemical issues
2) Circulators - enable you to control both the cooling and heating processors' temperatures.
3) Vacuum metal etchers - provide you the needed safety for automated batch processors to move your product through several chemical processes

Modutek offers a number of reliable chemical handling equipment so that you can perform your manufacturing processes and procedures at their maximum capacity. Modutek's equipment can also assure you it offers safety at the highest level. Whether chemicals are your company's main line or simply a byproduct, you can rely on Modutek to provide the right equipment for your specific high-tech manufacturing needs. You may call us at 866-803-1533 if you would like additional information or to obtain a quote.